Vaisala HUMICAP HMP46 User's Guide download pdf (Page 40)

HMI41 AND PROBES

Operating Manual M210316EN-A

8.6 Selecting the probe type

set

If necessary, change the setting with buttons ▲ and ▼. You have now

completed the setup procedure; turn your indicator off.

NOTE

The HMI41 setup contains further settings (start, baud,

seri and calib) that appear after probe type setting when

pressing ENTER. Start setting is changed only when

using the HMP44/44L probes (START 5, see the HM44

Operating Manual). For calib, see Chapter 5. Other

settings are meant for the HMI41 used as a field

calibrator for other Vaisala humidity transmitters. It is

recommended that these settings are not changed.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 71 72

No comments

Vaisala HUMICAP HMP46 User's Guide Page 40