Vaisala HUMICAP HMP155 User's Guide download pdf (Page 37)

Chapter 4 ________________________________________________________________ Operation

VAISALA _______________________________________________________________________ 35

UNIT [M/N]

Use the UNIT command to select metric or non-metric output units.

UNIT [M/N]

where

M = Metric units

N = Non-metric units

Example:

>unit n

Units : non metric

TIME

To set or display the current time, use the TIME serial line command.

TIME [HH MM SS]

Example:

> time 12 00 00

Time : 12:00:00

When you set the current time for the probe with the TIME command,

the time will be displayed as long as the probe is turned on. The time

setting will not be stored in any memory. At reset or when the probe is

turned off, the time will go back to 00:00:00.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 83 84

No comments

Vaisala HUMICAP HMP155 User's Guide Page 37