Vaisala DRYCAP DMT340 SERIES User's Guide download pdf (Page 33)

Chapter 3 _______________________________________________________________ Installation

VAISALA _______________________________________________________________________ 33

Grounding the Cables

Ground the screen of the electrical cable properly to achieve the best

possible EMC performance.

0504-049

Figure 16 Grounding the Screen of Electrical Cable

1. Cut back outer sheath to desired length.

2. Cut back screen braiding or screen foil to dimension X

(see figure 3).

3. Push the domed cap nut (item 1) and the seal insert with contact

socket of the gland (item 2+3) onto the cable as shown in the

diagram

4. Bend over the screen braiding or screen foil by about 90º

(item 4).

5. Push the seal insert with the contact socket of the gland

(item 2+3) up to the screen braiding or screen foil.

6. Mount the lower part (item 5) on the housing

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 168 169

No comments

Vaisala DRYCAP DMT340 SERIES User's Guide Page 33