Vaisala MM70 User Manual download pdf (Page 36)

USER'S GUIDE____________________________________________________________________

Selecting and Scaling the Analog

Output

0605-093

Figure 17 Analog Output Menus

To get analog measurement data, you need the analog output signal

cable, see section Options and Accessories Available on page 66. One

voltage signal channel 0...1.0V can be scaled for the selected quantity.

1. Connect the analog output signal cable connector to the

indicator base connector. Connect the screw terminal block as

follows:

- Brown wire: Common wire (-)

- Yellow-green wire: Signal (+)

2. Open the MENU. First press the right arrow key, and then press

the OPEN key.

3. Select Functions. Press the right arrow key.

4. Select Analog output, press the right arrow key.

5. Select Quantity and press the SET key to choose quantity.

6. Select quantity, press the SELECT key. (Only one quantity can

be chosen at a time. Only active quantities can be selected. To

change the active quantities, enter MENU, Display, Quantities

and units).

34 __________________________________________________________________ M210498EN-C

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 70 71

No comments

Vaisala MM70 User Manual Page 36