Vaisala WAC155 User's Guide download pdf (Page 42)

User's Guide ______________________________________________________________________

40 ___________________________________________________________________M210822EN-A

Example:

>setmes 1 type mwvquery

0 TYPE=NONE INTERVAL=0.00

1 TYPE=MWVQUERY INTERVAL=1.00

2 TYPE=NONE INTERVAL=0.00

3 TYPE=NONE INTERVAL=0.00

SETMEA

The SETMEA command configures measurement parameters. The

configurable parameters include anemometer transfer function

parameters gain and offset.

SETMEA [allowedspdchange] [maxinvalidspdcount] [gaincorr]

[offset] [powersave] <value><cr>

where

allowedspdchange = Maximum allowed difference between two

adjacent samples in the sensor data, range

0.1 ... 25.0 (default 10.0)

maxinvalidspdcount = Maximum number of adjacent discarded

samples in the sensor data. Sensor data sanity

check functionality is enabled if this value is

not zero. Range 0 ... 15 (default 2)

gaincorr = Anemometer transfer function gain parameter.

Range 0.0 … 10.0 (default 0.09853)

offset = Anemometer transfer function offset

parameter. Range -10.0 … 10.0 (default

0.4054)

powersave = Defines whether sensor power is pulsed or

provided continuously. Pulsing saves power,

since the sensors are only powered when they

are being read.

0 = continuous power

1 = pulsed power (default)

value = Defines the value for the option.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

No comments

Vaisala WAC155 User's Guide Page 42