Vaisala MM70 User Manual download pdf (Page 38)

USER'S GUIDE____________________________________________________________________

2. Connect the DMP70/GMP70/HMP70 probe to the other

connector port in the bottom of the indicator.

3. Turn on the device.

4. Check that the pressure settings of the probes (port I and II) are

the same, if you are taking measurements from the same

condition.

5. The display shows now the reading of the port I probe in the

upper row(s) and the reading of the port II in the lower row(s).

Recording Data

Recording

0605-113

Figure 18 Record and View Menu

1. Press the RECORD key. Alternatively open the MENU, select

Recording/Viewing.

2. Select Record data, press the right arrow key.

3. To change interval, select Interval and press the SET key.

4. Select the measurement interval with the up/down arrow keys.

Measurement intervals and maximum recording times are shown

in the

Table 1 on page 37.

5. Press the SELECT key.

6. To set recording duration, select Duration and press the SET

key.

7. Select the recording duration (1 min, 5 min, 15 min, 30 min, 1

h, 3 h, 12 h, 24 h, 7 days, 30 days, Memory full). Make the

selection with the arrow keys and finally press the SELECT

key.

36 __________________________________________________________________ M210498EN-C

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 70 71

No comments

Vaisala MM70 User Manual Page 38