User's Guide _______________________________________________________________________
114 __________________________________________________________________ M210243en-A
0105-053
Figure 106 MAWS Station Settings Window
NOTE
In the MAWS static parameters list, the entered values are treated
as numbers by the system. When you want to enter a series of
numbers as a string, write them between quotation marks (").
Table 20 below lists the items, which are changeable.
Table 20 Description of MAWS Station Settings Window
Item Description
Station name You can define a name for your station.
Altitude Enter the altitude of the MAWS station from sea level.
Pressure sensor
level
The height of the pressure sensor on the MAWS mast.
Wind direction:
(offset)
When you are setting the wind direction sensor to the
North, follow the instructions for installing MAWS. The
value inserted in the MAWS Stations Settings window
is the compass reading to the North corrected with
declination. The Wind direction field shows the offset
during the time when the sensor was set to the North.
Capacity of the
internal battery
Enter the capacity of the MAWS internal battery
QMB101.
Sensitivity values Calibration values of the radiation sensors are written
on the label of the sensors.
MAWS time and
date
After you change the MAWS battery, you need to reset
the system clock. Type the correct time (HH:MM) and
date (YY-MM-DD) in the appropriate fields and click
Set.
MAWS static
parameters
List of static parameters (depends on your
configuration).
Comments to this Manuals