Vaisala MAWS201 User's Guide Page 66

  • Download
  • Add to my manuals
  • Print
  • Page
    / 196
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 65
User's Guide _______________________________________________________________________
64 ___________________________________________________________________ M210243en-A
Installing Power Supply
Installing Solar Panel
Usually the solar panel is installed at the factory, and you should only
adjust the tilt angle and check that the connector is attached.
1. Locate the leg where the solar panel is to be installed. Note the
alignment of sensor arms vs. solar panel. See Figure 97 on page
102. Open the bolt (3) of the leg fastener (1) to release the leg
(2).
0201-027
Figure 53 Tripod's Leg Attachment
2. Glide the solar panel fixture down the leg so that the fixing
piece (1) inside the leg fit over the leg profile. When the fixture
is at suitable height, tighten the screws (4). Place the panel on
the fixture and tighten the screws (3 and 5). Fit the cable (2)
inside the leg and guide it through the hole in the leg fastener (1
in Figure 53 above). Put the leg back into the leg fastener and
tighten the bolt (3 in Figure 53 above).
Page view 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 195 196

Comments to this Manuals

No comments