Chapter 5 _______________________________________________________________Maintenance
VAISALA _______________________________________________________________________ 137
0009-022
Figure 115 QMW101/QMV110 Sensor Assembly
5. Insert the potentiometer assembly into the upper part tubing.
6. Screw the body parts (1) and (6) together. Tighten carefully.
7. Ensure that the mast adapter sleeve (7) is on the base part (6).
8. Place the bearing housing (8) to the casing and secure it with a
Seeger-ring (9).
9. Place the vane assembly (10) onto the body. The lock screw
hollow at the casing must be seen through the lock screw hole of
the vane body.
10. Fasten the assembly with a lock screw (11) and tighten gently.
11. Screw the bearing housing (12) into the casing (1) and tighten
gently.
12. Fasten the cup wheel to the sensor shaft.
Comments to this Manuals