HMP230 SERIES
M210225en-B Appendix 9: Re-gaining
147
suitable in an ambient with a gas flow rate of 2 m/s or more around the sensor
head. Furthermore, if the settling time is very long and the temperature
difference small (close to zero) and the ambient temperature changes during
re-gaining, the sensor may not reach the temperature difference within the
settling time and the transmitter will remain inactive for a long period of time.
3. LED COMMANDS
Re-gaining can be started manually using the LED command ll¡¡ (l = lit,
¡ = dark). Use the up and down press switches (marked with arrows in the
printed board) to find the command code and acknowledge it with the ENT
switch. The re-gaining parameters stored in the transmitter memory are used.
When re-gaining is over the LEDs are dark again.
OPENED COVER OF THE HMP 230
press switches
LEDs
UP
DOWN
ENT
Location of the press switches and LEDs
Comments to this Manuals