Vaisala HydroMet User's Guide download pdf (Page 66)

User’s Guide ______________________________________________________________________

64 ___________________________________________________________________M210785EN-E

Selecting Hardware

The Select Hardware frame on the upper left of the view is divided into

two list boxes. The Available list box provides a list of all the available

hardware modules. In the Connector/Module list box, the Connector

(block) list includes all the connectors to which the modules can be

connected. The Module list shows the connected modules.

The COM0 and COM1 communications ports already exist in the

hardware module list. Select the other modules.

To select the optional hardware used with the QML logger:

1. Click on a hardware module in the Available list.

2. Drag it into the correct place in the Module list or click on the

correct line and then click the Add button.

Removing Hardware

To remove optional hardware from the setup:

1. Select the hardware module to be removed by clicking on the

appropriate row.

2. Click the Remove button.

Configuring Hardware Modules

To make the setup work properly, the hardware module parameters

must have the correct settings. The list of configurable items may vary

depending on the selected module. For the basic hardware modules,

default settings have already been made. You do not necessarily need to

change these default settings.

NOTE

The following example illustrates the configuration of the fixed

COM0 communication port. The list of the configurable items varies

according to the module.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 217 218

No comments

Vaisala HydroMet User's Guide Page 66