Vaisala HydroMet User's Guide download pdf (Page 82)

User’s Guide ______________________________________________________________________

80 ___________________________________________________________________M210785EN-E

To edit the measurement name, proceed as follows:

1. Double-click the name.

2. Erase the old name and type in a new one. The name is

automatically saved when you press ENTER or click on another

measurement row.

The name may consist of the following characters: A ... Z, a ... z, 0 ... 9,

and _. No spaces are allowed.

The measurement names used should be unique, thus no name can refer

to more than one measurement in this setup.

Configuring Measurement

Parameters

Typically, you can configure only the validation values of the

parameters. These validation parameters set the limits for the

measurement values. If the measurement values exceed or go under

these limits, the measurements will be reported as missing.

Validation parameters include such values as the minimum and the

maximum values and the maximum change.

The basic set of sensors is automatically configured, so the values in the

Configure frame do not necessarily need to be changed.

If the Configure frame is empty, the measurement has no configurable

parameters.

In case you have changed the parameters but want to return to the

default settings, click the Set Default button.

NOTE

Since only the measurement name, instead of both the equipment

name and measurement name, will be used in the setup from this point

on, it is recommended that you change the name to one that is

meaningful to you and thus easy to remember.

NOTE

The information pane with general help information is available on all

the configurable items in case you need more detailed information.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 217 218

No comments

Vaisala HydroMet User's Guide Page 82