Vaisala DMT340 User Manual download pdf (Page 104)

User's Guide _______________________________________________________________________

102 __________________________________________________________________ M210704EN-G

Formatting Serial Line Message

NOTE

Instead of using the FTIME, FDATE and FST commands described in

this section, you can use the FORM command with modifiers TIME,

DATE, and STAT. See section FORM on page 104.

FTIME and FDATE

FTIME and FDATE commands will enable/disable output of time and

date to the serial line. To add time to R and SEND outputs enter:

FTIME [x]<cr>

To add date to R and SEND outputs enter:

FDATE [x]<cr>

where

ON or OFF

Example:

>send

Tdf=-20.6 'C H2O= 959 ppmV T= 23.9 'C RH= 3.3 %RH

>ftime on

Form. time : ON

>send

23:08:27 Tdf=-20.6 'C H2O= 959 ppmV T= 23.9 'C RH= 3.3

%RH

>fdate on

Form. date : ON

>send

2000-01-31 23:08:46 Tdf=-20.6 'C H2O= 960 ppmV T= 23.9 'C

RH= 3.3 %RH

FST

Use the FST command to include the status of purge, sensor warming

and AutoCal in output from the SEND and R commands.

FST [x]<cr>

where

ON or OFF (default)

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 190 191

No comments

Vaisala DMT340 User Manual Page 104