Vaisala DMT340 User Manual download pdf (Page 33)

Chapter 3 ________________________________________________________________ Installation

VAISALA ________________________________________________________________________ 31

Grounding the Cables

Ground the screen of the electrical cable properly to achieve the best

possible EMC performance.

0605-027

Figure 16 Grounding the Screen of Electrical Cable

Refer to Figure 16 above when performing the procedure below.

1. Cut back outer sheath to desired length.

2. Cut back screen braiding or screen foil to dimension X.

3. Push the domed cap nut (item 1) and the seal insert with contact

socket of the gland (item 2+3) onto the cable as shown in the

diagram

4. Bend over the screen braiding or screen foil by about 90º

(item 4).

5. Push the seal insert with the contact socket of the gland

(item 2+3) up to the screen braiding or screen foil.

6. Mount the lower part (item 5) on the housing

7. Push the seal with the contact socket of the gland (item 2+3)

into the lower part (item 5).

8. Fasten the domed cap nut (item 1) onto the lower part (item 5).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 190 191

No comments

Vaisala DMT340 User Manual Page 33