Vaisala DMT340 User Manual download pdf (Page 96)

User's Guide _______________________________________________________________________

94 ___________________________________________________________________ M210704EN-G

Opening a Serial/USB Connection

1. Power up the DMT340 and start the PuTTY application.

2. Select the Serial & USB settings category, and check that the

correct COM port is selected in the Serial or USB line to connect

to field. Change the port if necessary.

If you are using a Vaisala USB cable, you can check the port that it

uses by clicking the USB Finder... button. This opens the Vaisala

USB Instrument Finder program that has been installed along with

the USB drivers.

3. Check that the other serial/USB line settings are correct for your

connection, and change if necessary. The default settings (shown in

Figure 64 below) are used by the Service Port of the DMT340.

0810-070

Figure 64 Opening a Serial Connection

4. Click the Open button to open the connection window and start

using the serial line.

If PuTTY is unable to open the serial port you selected, it will show

you an error message instead. If this happens, restart PuTTY and

check the settings.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 190 191

No comments

Vaisala DMT340 User Manual Page 96