Vaisala DMT340 User Manual download pdf (Page 118)

User's Guide _______________________________________________________________________

116 __________________________________________________________________ M210704EN-G

6. Select the RUN interval and the unit. Press OK to confirm.

7. Select the Device address and press SET to confirm.

8. Select ECHO, and press ON to turn to it on, OFF to turn it off.

9. Press EXIT to return to the basic display.

The new user port settings set using the display/keypad are effective

immediately.

Using Serial Line

NOTE

You can use the serial commands to change/view the user port settings

even if you are currently connected to the serv

ice port.

SERI

Use the SERI command to set the communication settings for the user

port. Changed settings will be activated at next reset or power up.

SERI [b p d s]<cr>

where

Bit rate (110, 150, 300, 600, 1200, 2400, 4800, 9600,19200,

38400, 57600, 115200)

Parity (n = none, e = even, o = odd)

Data bits (7 or 8)

Stop bits (1 or 2)

The settings can be changed one parameter at a time or all parameters at

once.

Example (changing all parameters):

>SERI 600 N 8 1

600 N 8 1

Example (changing parity only):

>SERI O

4800 O 7 1

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 190 191

No comments

Vaisala DMT340 User Manual Page 118