Vaisala HMD70U Service Manual Page 99

  • Download
  • Add to my manuals
  • Print
  • Page
    / 162
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 98
97
Technical Data
For more information, visit
www.vaisala.com or contact
us at sales@vaisala.com
Measured Values
WATER ACTIVITY
Measurement range 0 ... 1 aw
Accuracy (including non-linearity, hysteresis and repeatability)
0 ... 0.9 ± 0.02
0.9 ... 1.0 ± 0.03
Response time
in oil flow (typical) <1 min (dry-wet)
MOISTURE
Calculated moisture content in ppm for mineral transformer oil
TEMPERATURE
Accuracy at +20 °C (+68 °F) ± 0.2 °C (0.36 °F)
Operating Environment
Operating temperature -40 ... +60 °C (-40 ... +140 °F)
Oil temperature -40 ... +80 °C (-40 ... +176 °F)
Pressure range
metal version up to 200 bar
plastic version up to 40 bar
Oil flow some flow recommended
Dimensions
Dimensions in mm (inches)
Options and Accessories
Stainless steel filter (standard) 225356SP
Stainless steel filter for high flow (>1 m/s) 221494SP
Connection cable for MM70 hand-held meter 219980
USB serial interface cable 219690
Sealing ring set (U-seal) ISO G1/2, 3 pcs 221525SP
Sealing ring set (copper) ISO G1/2, 3 pcs 221524SP
ISO 1/2" plug 218773
NPT 1/2" plug 222507
Sampling cell DMT242SC
Sampling cell w. Swagelok connectors DMT242SC2
Connection cable
2 m (6.5 ft), M8 snap-on 211598
0.32 m (1 ft) Shielded, M8 threaded HMP50Z032
3.0 m (9.8 ft), Shielded, M8 threaded HMP50Z300SP
5.0 m (16.4 ft), Shielded, M8 threaded HMP50Z500SP
10 m (32.8 ft), Shielded, M8 threaded HMP50Z1000SP
3 m, Shielded, connector 90° angle 221739
5 m, Shielded, connector 90° angle 221740
M8 threaded, Ch1 signal + Ch2 LED MP300LEDCBL
Outputs
Analog outputs (two channels)
current output 0 ... 20 mA, 4 ... 20 mA
voltage output 0 ... 5 V, 0 ... 10 V
Alarm level indication by analog signal user selectable
Digital outputs RS-485
Ref. B210755EN-C ©Vaisala 2011
This material is subject to copyright protection, with all
copyrights retained by Vaisala and its individual partners. All
rights reserved. Any logos and/or product names are trademarks
of Vaisala or its individual partners. The reproduction, transfer,
distribution or storage of information contained in this brochure
in any form without the prior written consent of Vaisala is strictly
prohibited. All specifications — technical included — are subject
to change without notice.
General
Sensor HUMICAP
®
Cable connections (2 ports) M8, 4 pin
Minimum operating voltage with
RS-485 output 14 ... 28 VDC
voltage output 16 ... 28 VDC
current output 22 ... 28 VDC
Supply current
normal measurement 20 mA + load current
External load for
voltage output min. 10 kOhm
current output max. 500 Ohm
Housing material
metal AISI 316L
plastic PPS + 40% GF
Mechanical connections with bonded seal ring (washer)
metal version G 1/2" ISO or NPT 1/2’’
plastic version G 1/2’’ ISO
Housing classification IP65 (NEMA 4)
Storage temperature range -40 ... +80 °C (-40 ... +176 °F)
Weight
with plastic housing 65 g (2.3 oz)
with metal housing 200 g (7 oz)
Complies with EMC standard EN61326-1, Electrical equipment
for measurement control and laboratory use - EMC requirements;
Industrial environment
76 [3]
127.5 [5.02]
30.5 [1.2]
1/2" NPT
119.5 [4.7]
Ø
12 [0.47]
76 [3]
30.5 [1.2]
G1/2" ISO 228-1
33 [1.3]
AW 30 [1.18]
Ø
12 [0.47]
Ø
43.5 [1.7]
51.5 [2.02]
76 [3]
127.5 [5.02]
30.5 [1.2]
1/2" NPT
119.5 [4.7]
Ø
12 [0.47]
76 [3]
30.5 [1.2]
G1/2" ISO 228-1
33 [1.3]
AW 30 [1.18]
Ø
12 [0.47]
Ø
43.5 [1.7]
51.5 [2.02]
Page view 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 161 162

Comments to this Manuals

No comments