Vaisala WINDCAP WS425 User's Guide download pdf (Page 65)

Chapter 5 _______________________________________ Serial Communication and Analog Output

VAISALA _______________________________________________________________________ 63

The ROSA - MES12 profile is intended for connecting WMT700 to

Vaisala ROSA system.

The WS425 profiles can be used when upgrading from the WS425 wind

sensor to WMT700.

For a list of the serial commands available for all communication profiles

supported by WMT700, see Appendix A, Complete Command Set for

WMT700 on page 121.

Protocols

In addition to the protocols preconfigured under standard profiles, there

are more protocols in WMT700. The protocol used is defined by related

parameters. For more information, see Parameters Handling Commands

on page 74. The full list of supported protocols is:

- WMT700

- SDI12

WS425 - ASOS

- WS425 - ASCII

- WS425 - NMEA Standard

- WS425 - WAT11

- MES12

Measurement and Configuration Modes

The serial ports have the following operation modes:

- Configuration mode is used for configuring the WMT700 settings

over a serial connection. The selected communication profile does not

affect the available configuration commands.

- Measurement mode is used for operating WMT700. In measurement

mode the available commands depend on the selected profile. The port

that is in measurement mode can receive polling commands and

respond to them with data messages.

For a list of all serial commands supported by WMT700 in configuration

and measurement modes, see Appendix A, Complete Command Set for

WMT700, on page 121.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 135 136

No comments

Vaisala WINDCAP WS425 User's Guide Page 65