Vaisala HUMICAP HMP41 User's Guide download pdf (Page 31)

Chapter 4 ________________________________________________________________ Operation

VAISALA _______________________________________________________________________ 29

3. Select the Serial settings category, and check that the correct COM

port is selected in the Serial line to connect to field.

Note: You can check which port the USB cable is using with the

Vaisala USB Instrument Finder program that has been installed

in the Windows Start menu.

4. Check that the other serial settings are correct for your connection,

and change if necessary. Flow control should be set to None unless

you have a reason to change it.

5. Click the Open button to open the connection window and start

using the serial line.

Note: If PuTTY is unable to open the serial port you selected, it

will show you an error message instead. If this happens, restart

PuTTY and check the settings.

6. You may need to adjust the Local echo setting in the Terminal

category to see what you are typing on the serial line. To access the

configuration screen while a session is running, click the right

mouse button over the session window, and select Change

Settings... from the pop-up menu.

0807-004

Figure 13 PuTTY Terminal Application

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 95 96

No comments

Vaisala HUMICAP HMP41 User's Guide Page 31