Vaisala HUMICAP HMP41 User's Guide download pdf (Page 44)

User's Guide ______________________________________________________________________

42 __________________________________________________________________ M211280EN-A

Set/Show Analog Output Error Levels

Use the AERR command to show or set the analog output error levels.

AERR [level1 level2]<cr>

where

level1 level2

= Error levels for analog output channel

Examples:

>aerr

Ch1 Error level : 0.0

Ch2 Error level : 0.0

>aerr 10.8 10.8

Ch1 Error level : 10.8

Ch2 Error level : 10.8

Set/Show Analog Output Quantity and

Scaling

After you have defined the quantities with the CALCS command, use the

ASEL command to show or set the quantity output by the analog

channels, and the scaling that is used. If you do not enter scaling limits,

default values are used. Valid quantities are: RH, T, TD, TDF, A, X, H,

TW, PWS, PW and NONE. NONE parameter disables analog output and

output is forced to error level.

ASEL [q1 q2] [lo1 hi1 lo2 hi2]<cr>

where

q1 q2

= Analog output channel quantities

lo1 lo2

= Low limits of scaling

hi1 hi2

= High limits of scaling

Syntax for single-parameter transmitters:

ASEL [q] [lo hi]<cr>

Where

= Analog output channel quantity

= Low limit of scaling

= High limit of scaling

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 95 96

No comments

Vaisala HUMICAP HMP41 User's Guide Page 44