Vaisala WAA151 Installation Manual download pdf (Page 103)

Chapter 4 ________________________________________________________________ Installation

VAISALA _______________________________________________________________________ 101

0105-069

Figure 94 DSU12 Installed on Support Arm

3. Strip the sensor cable wires and connect them to connector

terminals according to Table 13 below. Assemble the connector.

Table 13 Cable Pins of DSU12 Sunshine Duration

Sensor

Pin Number Wire Color Signal

2 Red Signal HI

3 Blue Supply, -

4. Open the enclosure's door and locate the logger.

5. Remove connector from the input channel (for example CH3,

exact channel depends on your configuration). Insert adapter

QLA003 to the channel and place the connector on top of it (see

Figure 95 below).

0201-040

Figure 95 Adapter Installed to Connector

6. Connect the signal cable to an available receptacle (for example

CH3) at the bottom of the equipment enclosure (see section

Connecting Cables on page 129).

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 132 133

No comments

Vaisala WAA151 Installation Manual Page 103