Chapter 4 ________________________________________________________________ Installation
VAISALA _______________________________________________________________________ 121
GSM Data Modem
Install the GSMM20T GSM Data Modem on the door plate of the
enclosure with two self-tapping screws, see Figure 120 below.
Connect the wires according to Figure 121 on page 122.
0202-015
Figure 120 Standard Installation of GSM Modem
The following numbers refer to Figure 120 above.
1=
Self-tapping screw B3.9 × 9.5, 2 pieces
2 = Antenna cable
3 = Antenna connector
4 = Cables tied together with cable ties
5 = Power connector
6 = Signal cable connector
After connecting the cables, configure the modem with the Lizard
Setup software. For more information, refer to the separate Technical
Reference.
Comments to this Manuals