Vaisala MAWS201 User's Guide Page 114

  • Download
  • Add to my manuals
  • Print
  • Page
    / 196
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 113
User's Guide _______________________________________________________________________
112 __________________________________________________________________ M210243en-A
Giving Commands
When you have established the connection, you can use the
commands (described in Table 25 on page 129) to communicate with
MAWS. Commands are actually text sent from the PC or terminal to
MAWS.
To open the connection, give the open command To close the terminal
connection, give the command close. Logging is not affected unless it
is stopped using the logstop command. In closed mode, the serial line
will be available for report sending.
NOTE
Both open and close commands have to be typed exactly right before
they can be executed. This means, you can not use the BACKSPACE
key to correct your typing. Simply retype the command and press
ENTER to give the command again.
Most of the commands can be used for both setting a value to some
parameter or viewing the set value of the parameter.
Type help to get a list of the available commands. Each command
must be entered using the correct syntax. You do not have to
memorize any complex commands since at any time you can view a
help text that shows the correct syntax. Just type help and the
command name.
Table 19 Interpreting Help Texts (the Correct Syntax)
Generic
Representation
Example Note
Use the
parameter name.
warnings [clear]
To see the warnings, type:
warnings
To remove warnings, type:
warnings clear
time [HH MM SS] [YY MM DD]
To see current time, type:
time
To set new time, type e.g.:
time 15 45 00
To set new time and date,
type e.g.:
time 15 45 00 01 03 20
Parameters shown
in [ ] can be left
out.
Replace
parameter
symbols with
values.
loggo <group_id>
Parameters shown
in < > cannot be
left out.
Page view 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 195 196

Comments to this Manuals

No comments