Vaisala MAWS201 User's Guide download pdf (Page 16)

User's Guide _______________________________________________________________________

14 ___________________________________________________________________ M210243en-A

CAUTION

Do not make changes to the wiring. Incorrect wiring can damage the

device and prevent it from operating correctly.

CAUTION

Be careful when moving the mast. To prevent damage to the sensors,

remove them (and the sensor arms) before moving the station.

NOTE

When disposing of old batteries, be sure to do so in accordance with

all regulations applicable in your area.

ESD Protection

Electrostatic Discharge (ESD) can cause immediate or latent damage

to electronic circuits. Vaisala products are adequately protected

against ESD for their intended use. However, it is possible to damage

the product by delivering electrostatic discharges when touching,

removing, or inserting any objects inside the equipment housing.

To make sure you are not delivering high static voltages yourself:

- Handle ESD sensitive components on a properly grounded and

protected ESD workbench. When this is not possible, ground

yourself to the equipment chassis before touching the boards.

Ground yourself with a wrist strap and a resistive connection cord.

When neither of the above is possible, touch a conductive part of

the equipment chassis with your other hand before touching the

boards.

- Always hold the boards by the edges and avoid touching the

component contacts.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 195 196

No comments

Vaisala MAWS201 User's Guide Page 16