User's Guide _______________________________________________________________________
76 ___________________________________________________________________ M210243en-A
1
2
9806-062
Figure 67 Mounting Plates Attachment
2. Attach the rain gauge (1) to the arm with the screws (2)
provided with the rain gauge.
2
1
9901-010
Figure 68 Rain Gauge Attachment
QMR102
Due to the low weight of the rain gauge, it must be mounted securely.
QMR102 can be installed either using a specific stand RG35003 or on
the ground when it is attached to a properly anchored RGB1 base plate
with provided studs. As well, the gauge can be mounted via the three
holes in the base, for example, to a paving slab. You should use rawl
plugs and standard steel studs for this purpose as they provide a means
of leveling the rain gauge.
Installing on the Stand RG35003
To install the gauge on the stand, follow the procedure below:
1. Attach the stand (3) to a concrete foundation with the bolts (5).
See Figure 69 on page 77.
Comments to this Manuals